How to use sewing machine?

Using a sewing machine involves several steps, from setting up the machine to completing your sewing project. Here is a step-by-step guide to help you get started: sewing machine price in chennai

• Choose a Location: Place your sewing machine on a stable, flat surface with good lighting.

• Plug In the Machine: Connect the power cord to an electrical outlet and the foot pedal to the machine.

• Attach the Presser Foot: Ensure the appropriate presser foot is attached for your project (e.g., standard foot, zipper foot, etc.).

• Place the spool of thread on the spool pin.
• Guide the thread through the bobbin winding thread guide.
• Place the end of the thread through a hole in the bobbin, place the bobbin on the bobbin winder, and push it to the right.
• Hold the thread end, press the foot pedal, and wind the bobbin until it is full. Cut the thread and remove the bobbin.

• Open the bobbin case and insert the bobbin, making sure the thread unwinds in the correct direction (usually counter-clockwise).
• Pull the thread through the slot and under the tension spring.

• Raise the presser foot to release the tension disks.
• Follow the threading path as indicated in your machine’s manual, usually guiding the thread through a series of thread guides and tension disks.
• Thread the needle from front to back, leaving a few inches of thread hanging.

• Hold the upper thread with your left hand.
• Turn the handwheel towards you to lower and then raise the needle, which will catch the bobbin thread and bring it up.
• Pull both threads to the back under the presser foot.

• Choose your desired stitch type (e.g., straight, zigzag) using the stitch selector dial.
• Adjust stitch length and width as needed.

• Place your fabric under the presser foot, aligning it with the seam guide on the needle plate for a straight seam.
• Lower the presser foot to hold the fabric in place.

• Press the foot pedal gently to start sewing. Begin with a few stitches forward, then reverse a few stitches to lock the seam, and continue sewing forward.
• Guide the fabric gently with your hands, letting the machine feed it through.

• When you reach the end of the seam, use the reverse function to backstitch a few stitches to secure the seam.
• Raise the needle to its highest position using the handwheel.
• Raise the presser foot and pull the fabric out to the side.
• Cut the threads using the machine’s thread cutter or a pair of scissors.

• Turn off the power switch and unplug the machine when you’re finished.

• Remove lint and threads from the machine and bobbin area.
• Follow your machine’s manual for regular maintenance, such as oiling.

• Read the Manual: Always refer to your sewing machine’s manual for specific instructions and troubleshooting tips.
• Practice: Start with scrap fabric to get comfortable with the machine settings and controls.
• Adjust Tension: If your stitches are uneven, adjust the thread tension settings as needed.
• Use the Right Needle and Thread: Choose the appropriate needle and thread for your fabric type.

Using a sewing machine may seem daunting at first, but with practice, it becomes much easier. By following these steps, you can set up your machine, thread it correctly, and start sewing efficiently. Whether you are working on simple repairs or complex projects, understanding the basics of your sewing machine will help you achieve great results. juki machine price in chennai